Articles de journaux
|
2022
|
| 19. | Ni, Sijie; Bauw, Grégory; Romary, Raphaël; Cassoret, Bertrand; Besnerais, Jean Le: Damper Winding for Noise and Vibration Reduction of a Permanent Magnet Synchronous Machine. Dans: Sensors, vol. 22, no. 7, p. 2738, 2022, ISSN: 1424-8220. @article{Ni2022b,
title = {Damper Winding for Noise and Vibration Reduction of a Permanent Magnet Synchronous Machine},
author = {Sijie Ni and Grégory Bauw and Raphaël Romary and Bertrand Cassoret and Jean Le Besnerais},
url = {https://www.mdpi.com/1424-8220/22/7/2738},
doi = {10.3390/s22072738},
issn = {1424-8220},
year = {2022},
date = {2022-04-01},
journal = {Sensors},
volume = {22},
number = {7},
pages = {2738},
abstract = {In this paper, a passive method for the noise reduction of the PMSM (Permanent Magnet Synchronous Machine) is presented. The principle is to add an auxiliary three-phase winding into the same slots as the initial stator winding, short-circuited via three capacitors of suitable values. The aim is to create a damping effect for flux density harmonic components, especially high-frequency harmonics from the PWM (PulseWidth Modulation), in the air gap in order to reduce the noise and vibration of the PMSM. The method can significantly reduce the global sound pressure level and vibrations for specific frequencies. Because of passive features, the additional winding effectively mitigates magnetic noise without greatly increasing the complexity of design and manufacturing, which also extends its applicability to different PMSMs.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
In this paper, a passive method for the noise reduction of the PMSM (Permanent Magnet Synchronous Machine) is presented. The principle is to add an auxiliary three-phase winding into the same slots as the initial stator winding, short-circuited via three capacitors of suitable values. The aim is to create a damping effect for flux density harmonic components, especially high-frequency harmonics from the PWM (PulseWidth Modulation), in the air gap in order to reduce the noise and vibration of the PMSM. The method can significantly reduce the global sound pressure level and vibrations for specific frequencies. Because of passive features, the additional winding effectively mitigates magnetic noise without greatly increasing the complexity of design and manufacturing, which also extends its applicability to different PMSMs. |
2021
|
| 15. | Balavoine, François; Bauw, Grégory; Cassoret, Bertrand; Romary, Raphaël: A comparative study of LC filter and damper winding for noise reduction of PWM-fed IM. Dans: International Journal of Applied Electromagnetics and Mechanics, vol. 64, p. S167–S177, 2021, ISSN: 13835416. @article{Balavoine2021,
title = {A comparative study of LC filter and damper winding for noise reduction of PWM-fed IM},
author = {François Balavoine and Grégory Bauw and Bertrand Cassoret and Raphaël Romary},
editor = {Paolo Di Barba and Maria Evelina Mognaschi and Sławomir Wiak},
doi = {10.3233/JAE-209513},
issn = {13835416},
year = {2021},
date = {2021-01-01},
journal = {International Journal of Applied Electromagnetics and Mechanics},
volume = {64},
pages = {S167--S177},
abstract = {In this paper, two passive solutions for noise reduction of PWM-fed induction machines are compared: the use of LC filter connected between the PWM inverter and the machine, and a three-phase damper wound inside the machine and connected to three capacitors. Firstly, the principle, advantages and disadvantages of each solution are recalled. The equivalent electrical circuits used for the study are also explained. Then, the effectiveness of both solutions in terms of voltage harmonic reduction and harmonic flux density reduction is discussed. The weight and size criteria are also studied. Results are given for two different power ranges of induction machines: 4 kW and 55 kW, and for two different switching frequencies of the PWM inverter: 3 kHz and 8 kHz.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
In this paper, two passive solutions for noise reduction of PWM-fed induction machines are compared: the use of LC filter connected between the PWM inverter and the machine, and a three-phase damper wound inside the machine and connected to three capacitors. Firstly, the principle, advantages and disadvantages of each solution are recalled. The equivalent electrical circuits used for the study are also explained. Then, the effectiveness of both solutions in terms of voltage harmonic reduction and harmonic flux density reduction is discussed. The weight and size criteria are also studied. Results are given for two different power ranges of induction machines: 4 kW and 55 kW, and for two different switching frequencies of the PWM inverter: 3 kHz and 8 kHz. |
2020
|
| 13. | Zidat, Farid; Mavrudieva, Diana; Lombard, Patrick; Bauw, Grégory; Cassoret, Bertrand; Lecointe, Jean-Philippe: Induction motor equivalent circuit identification from finite element results. Dans: International Journal of Applied Electromagnetics and Mechanics, vol. 63, no. 4, p. 673–679, 2020, ISSN: 13835416. @article{Zidat2020,
title = {Induction motor equivalent circuit identification from finite element results},
author = {Farid Zidat and Diana Mavrudieva and Patrick Lombard and Grégory Bauw and Bertrand Cassoret and Jean-Philippe Lecointe},
editor = {Jean-Philippe Lecointe and Ewa Napieralska and Andrzej Demenko},
url = {https://www.medra.org/servlet/aliasResolver?alias=iospress&doi=10.3233/JAE-209203},
doi = {10.3233/JAE-209203},
issn = {13835416},
year = {2020},
date = {2020-08-01},
journal = {International Journal of Applied Electromagnetics and Mechanics},
volume = {63},
number = {4},
pages = {673--679},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
2019
|
| 12. | Bauw, Grégory; Cassoret, Bertrand; Ninet, Olivier; Romary, Raphaël: Design of an induction machine with damper windings for noise and vibrations reduction. Dans: COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol. 38, no. 4, p. 1253–1262, 2019, ISSN: 0332-1649. @article{Bauw2019,
title = {Design of an induction machine with damper windings for noise and vibrations reduction},
author = {Grégory Bauw and Bertrand Cassoret and Olivier Ninet and Raphaël Romary},
url = {https://www.emerald.com/insight/content/doi/10.1108/COMPEL-10-2018-0425/full/html},
doi = {10.1108/COMPEL-10-2018-0425},
issn = {0332-1649},
year = {2019},
date = {2019-07-01},
journal = {COMPEL - The international journal for computation and mathematics in electrical and electronic engineering},
volume = {38},
number = {4},
pages = {1253--1262},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
2018
|
| 10. | Bauw, Grégory; Balavoine, François; Cassoret, Bertrand; Ninet, Olivier; Romary, Raphaël: Equivalent Circuit of PWM-Fed Induction Machine With Damper Winding for Noise and Vibration Reduction. Dans: IEEE Transactions on Industry Applications, vol. 54, no. 5, p. 4147–4155, 2018, ISSN: 0093-9994. @article{Bauw2018b,
title = {Equivalent Circuit of PWM-Fed Induction Machine With Damper Winding for Noise and Vibration Reduction},
author = {Grégory Bauw and François Balavoine and Bertrand Cassoret and Olivier Ninet and Raphaël Romary},
url = {https://ieeexplore.ieee.org/document/8352665/},
doi = {10.1109/TIA.2018.2831635},
issn = {0093-9994},
year = {2018},
date = {2018-09-01},
journal = {IEEE Transactions on Industry Applications},
volume = {54},
number = {5},
pages = {4147--4155},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
| 9. | Bauw, Grégory; Cassoret, Bertrand; Romary, Raphaël; Ninet, Olivier: Damper winding for noise and vibration reduction of induction machine under sinusoidal conditions. Dans: International Journal of Applied Electromagnetics and Mechanics, vol. 57, no. S1, p. 13–21, 2018, ISSN: 13835416. @article{Bauw2018,
title = {Damper winding for noise and vibration reduction of induction machine under sinusoidal conditions},
author = {Grégory Bauw and Bertrand Cassoret and Raphaël Romary and Olivier Ninet},
editor = {Sławomir Wiak and Paolo Di Barba and Krzysztof Komeza},
url = {https://www.medra.org/servlet/aliasResolver?alias=iospress&doi=10.3233/JAE-182296},
doi = {10.3233/JAE-182296},
issn = {13835416},
year = {2018},
date = {2018-04-01},
journal = {International Journal of Applied Electromagnetics and Mechanics},
volume = {57},
number = {S1},
pages = {13--21},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
2017
|
| 6. | Bauw, Grégory; Cassoret, Bertrand; Ninet, Olivier; Romary, Raphaël: Enroulement amortisseur pour la réduction des bruits et vibrations des machine asynchrones. Dans: Revue 3EI, vol. 89, p. 40–44, 2017. @article{Bauw2017,
title = {Enroulement amortisseur pour la réduction des bruits et vibrations des machine asynchrones},
author = {Grégory Bauw and Bertrand Cassoret and Olivier Ninet and Raphaël Romary},
year = {2017},
date = {2017-01-01},
journal = {Revue 3EI},
volume = {89},
pages = {40--44},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Actes
|
2022
|
| 18. | Ni, Sijie; Bauw, Grégory; Cassoret, Bertrand; Romary, Raphaël: Analysis of noise variation in PMSM with damper winding under different operating conditions. Dans: XXV International Conference on Electrical Machines (ICEM), Valencia, Spain, 2022. @inproceedings{Ni2022,
title = {Analysis of noise variation in PMSM with damper winding under different operating conditions},
author = {Sijie Ni and Grégory Bauw and Bertrand Cassoret and Raphaël Romary},
year = {2022},
date = {2022-09-01},
booktitle = {XXV International Conference on Electrical Machines (ICEM)},
address = {Valencia, Spain},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 17. | Hebri, Mohamed-Amine; Rebhaoui, Abderrahmane; Bauw, Grégory; Lecointe, Jean-Philippe; Duchesne, Stéphane; Mallard, Vincent; Zito, Gianluca; Abdelli, Abdenour: Electromagnetic Study of High Power Density PMSM for Automotive Application. Dans: XXV International Conference on Electrical Machines (ICEM), Valencia, Spain, 2022. @inproceedings{Hebri2022,
title = {Electromagnetic Study of High Power Density PMSM for Automotive Application},
author = {Mohamed-Amine Hebri and Abderrahmane Rebhaoui and Grégory Bauw and Jean-Philippe Lecointe and Stéphane Duchesne and Vincent Mallard and Gianluca Zito and Abdenour Abdelli},
year = {2022},
date = {2022-09-01},
urldate = {2022-09-01},
booktitle = {XXV International Conference on Electrical Machines (ICEM)},
address = {Valencia, Spain},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 16. | Ni, Sijie; Bauw, Grégory; Cassoret, Bertrand; Romary, Raphaël; Besnerais, Jean Le: Réduction des bruits et vibrations des machines synchrones à aimants permanents par bobinage amortisseur. Dans: Journées couplées SEEDS / Jeunes Chercheurs en Génie Électrique, Le Croisic, France, 2022. @inproceedings{Ni2022a,
title = {Réduction des bruits et vibrations des machines synchrones à aimants permanents par bobinage amortisseur},
author = {Sijie Ni and Grégory Bauw and Bertrand Cassoret and Raphaël Romary and Jean Le Besnerais},
year = {2022},
date = {2022-06-01},
booktitle = {Journées couplées SEEDS / Jeunes Chercheurs en Génie Électrique},
address = {Le Croisic, France},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2021
|
| 14. | Ni, Sijie; Bauw, Grégory; Romary, Raphaël; Cassoret, Bertrand; Besnerais, Jean Le: Damper winding for noise and vibration reduction of Permanent Magnet Synchronous Machine. Dans: 20th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF), Lodz/Cracow, Poland, 2021. @inproceedings{Ni2021,
title = {Damper winding for noise and vibration reduction of Permanent Magnet Synchronous Machine},
author = {Sijie Ni and Grégory Bauw and Raphaël Romary and Bertrand Cassoret and Jean Le Besnerais},
year = {2021},
date = {2021-09-01},
booktitle = {20th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF)},
address = {Lodz/Cracow, Poland},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2019
|
| 11. | Zidat, Farid; Bauw, Grégory; Cassoret, Bertrand; Guffroy, Thomas: Magneto-vibro-acoustic Design of PWM-fed Induction Machines. Dans: XIX International Symposium on Electromagnetic Fields (ISEF), p. 1–2, Nancy, France, 2019, ISBN: 9781728115603. @inproceedings{Zidat2019,
title = {Magneto-vibro-acoustic Design of PWM-fed Induction Machines},
author = {Farid Zidat and Grégory Bauw and Bertrand Cassoret and Thomas Guffroy},
url = {https://ieeexplore.ieee.org/document/9096884/},
doi = {10.1109/ISEF45929.2019.9096884},
isbn = {9781728115603},
year = {2019},
date = {2019-08-01},
booktitle = {XIX International Symposium on Electromagnetic Fields (ISEF)},
pages = {1--2},
address = {Nancy, France},
abstract = {The aim of this paper is to study the impact of the PWM supply on the vibro acoustic behavior of an induction machine (IM). Modelling and measurement results will be shown.},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
The aim of this paper is to study the impact of the PWM supply on the vibro acoustic behavior of an induction machine (IM). Modelling and measurement results will be shown. |
2018
|
| 8. | Zidat, Farid; Mavrudieva, Diana; Lombard, Patrick; Bauw, Grégory; Cassoret, Bertrand; Lecointe, Jean-Philippe: Induction Motor Equivalent Circuit Identification from Finite Element Results. Dans: XXV Symposium Electromagnetic Phenomena in Nonlinear Circuits (EPNC), Arras, France, 2018. @inproceedings{Zidat2018,
title = {Induction Motor Equivalent Circuit Identification from Finite Element Results},
author = {Farid Zidat and Diana Mavrudieva and Patrick Lombard and Grégory Bauw and Bertrand Cassoret and Jean-Philippe Lecointe},
year = {2018},
date = {2018-06-01},
booktitle = {XXV Symposium Electromagnetic Phenomena in Nonlinear Circuits (EPNC)},
address = {Arras, France},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 7. | Bauw, Grégory; Zidat, Farid; Cassoret, Bertrand: Magneto-vibro-acoustic Efficient Design of PWM-fed Induction Machines. Dans: SIA-CTTM Automotive NVH Comfort, Le Mans, France, 2018. @inproceedings{Bauw2018a,
title = {Magneto-vibro-acoustic Efficient Design of PWM-fed Induction Machines},
author = {Grégory Bauw and Farid Zidat and Bertrand Cassoret},
year = {2018},
date = {2018-01-01},
booktitle = {SIA-CTTM Automotive NVH Comfort},
address = {Le Mans, France},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2017
|
| 5. | Bauw, Grégory; Cassoret, Bertrand; Ninet, Olivier; Romary, Raphaël: Enroulement amortisseur pour la réduction des bruits et vibrations des machines asynchrones. Dans: Journées couplées SEEDS / Jeunes Chercheurs en Génie Électrique, Arras, France, 2017. @inproceedings{Bauw2017a,
title = {Enroulement amortisseur pour la réduction des bruits et vibrations des machines asynchrones},
author = {Grégory Bauw and Bertrand Cassoret and Olivier Ninet and Raphaël Romary},
year = {2017},
date = {2017-06-01},
booktitle = {Journées couplées SEEDS / Jeunes Chercheurs en Génie Électrique},
address = {Arras, France},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 4. | Bauw, Grégory; Balavoine, François; Cassoret, Bertrand; Ninet, Olivier; Romary, Raphaël: Winding for noise and vibration reduction of PWM-fed induction machines. Dans: IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 2017. @inproceedings{Bauw2017b,
title = {Winding for noise and vibration reduction of PWM-fed induction machines},
author = {Grégory Bauw and François Balavoine and Bertrand Cassoret and Olivier Ninet and Raphaël Romary},
year = {2017},
date = {2017-05-01},
booktitle = {IEEE International Electric Machines and Drives Conference (IEMDC)},
address = {Miami, FL, USA},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 3. | Cassoret, Bertrand; Bauw, Grégory; Romary, Raphaël; Ninet, Olivier: Damper Winding for Noise and Vibration Reduction of Induction Machine Under Sinusoidal Conditions. Dans: XVIII International Symposium on Electromagnetic Fields (ISEF), Lodz, Poland, 2017. @inproceedings{Cassoret2017,
title = {Damper Winding for Noise and Vibration Reduction of Induction Machine Under Sinusoidal Conditions},
author = {Bertrand Cassoret and Grégory Bauw and Raphaël Romary and Olivier Ninet},
year = {2017},
date = {2017-01-01},
booktitle = {XVIII International Symposium on Electromagnetic Fields (ISEF)},
address = {Lodz, Poland},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2016
|
| 2. | Bauw, Grégory; Balavoine, François; Cassoret, Bertrand; Ninet, Olivier; Romary, Raphaël: Enroulement amortisseur pour la réduction des bruits et vibrations d'une machine asynchrone alimentée par MLI. Dans: Symposium de Génie Électrique (SGE) : EF-EPF-MGE, p. 7–9, Grenoble, France, 2016. @inproceedings{Bauw2016a,
title = {Enroulement amortisseur pour la réduction des bruits et vibrations d'une machine asynchrone alimentée par MLI},
author = {Grégory Bauw and François Balavoine and Bertrand Cassoret and Olivier Ninet and Raphaël Romary},
year = {2016},
date = {2016-06-01},
booktitle = {Symposium de Génie Électrique (SGE) : EF-EPF-MGE},
pages = {7--9},
address = {Grenoble, France},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 1. | Bauw, Grégory; Balavoine, François; Cassoret, Bertrand; Ninet, Olivier; Romary, Raphaël: Enroulement amortisseur pour la réduction des bruits et vibrations d ' une machine asynchrone alimentée par MLI. Dans: Journées couplées SEEDS / Jeunes Chercheurs en Génie Électrique, p. 7–9, Laval, France, 2016. @inproceedings{Bauw2016,
title = {Enroulement amortisseur pour la réduction des bruits et vibrations d ' une machine asynchrone alimentée par MLI},
author = {Grégory Bauw and François Balavoine and Bertrand Cassoret and Olivier Ninet and Raphaël Romary},
year = {2016},
date = {2016-03-01},
booktitle = {Journées couplées SEEDS / Jeunes Chercheurs en Génie Électrique},
pages = {7--9},
address = {Laval, France},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
